Reneesmpl72

מתוך The Phnomenologic Cage
(הבדלים בין גרסאות)
קפיצה אל: ניווט, חיפוש
מ (דף חדש: A binary code is usually a method of representing text or laptop processor guidance through the usage of the binary number system's two-binary digits 0 and one. That is achieved by assi...)
 
 
שורה 1: שורה 1:
A binary code is usually a method of representing text or laptop processor guidance through the usage of the binary number system's two-binary digits 0 and one. That is achieved by assigning a little string to each certain symbol or instruction. For example, a binary string of eight binary digits (bits) can characterize any of 256 achievable values and can hence correspond to some number of unique symbols, letters or guidance.
+
A binary code is a strategy for representing text or laptop or computer processor instructions because of the utilization of the binary quantity system's two-binary digits 0 and one. It is accomplished by assigning somewhat string to every particular symbol or instruction. For example, a binary string of eight binary digits (bits) can stand for any of 256 possible values and can consequently correspond into a selection of distinct symbols, letters or instructions.
  
In computing and telecommunication, binary codes are used for just about any of the range of methods of encoding information, these types of as character strings, into little bit strings. All those approaches might be fixed-width or variable-width. Inside a fixed-width binary code, each letter, digit, or other character, is represented by somewhat string with the similar duration; that little bit string, interpreted to be a binary variety, is normally shown in code tables in octal, decimal or hexadecimal notation. There are lots of character sets and many character encodings for them.
+
In computing and telecommunication, binary codes are utilized for any of a variety of methods of encoding knowledge, this sort of as character strings, into bit strings. All those techniques may very well be fixed-width or variable-width. In a very fixed-width binary code, every letter, digit, or other character, is represented by a little string on the identical duration; that little bit string, interpreted being a binary amount, is frequently exhibited in code tables in octal, decimal or hexadecimal notation. There are many character sets and lots of character encodings for them.
  
Somewhat string, interpreted to be a binary amount, is often translated into a decimal number. As an example, the lowercase "a" as represented through the little bit string 01100001, can also be represented because decimal selection ninety seven.
+
A little bit string, interpreted like a binary variety, may be translated into a decimal quantity. For example, the lowercase "a" as represented through the bit string 01100001, could also be represented as being the decimal variety 97.
  
Binary numbers have been initial described in Chandashutram prepared by Pingala in one hundred BC. Binary Code was initially introduced because of the German mathematician and philosopher Gottfried Wilhelm Leibniz for the duration of the seventeenth century. Leibniz was wanting to discover a technique that converts logic’s verbal statements right into a pure mathematical one. Right after his tips were dismissed, he came across a typical Chinese text known as ‘I Ching’ or ‘Book of Changes’, which employed a kind of binary code. The book had verified his principle that life may very well be simplified or diminished all the way down to a sequence of straightforward propositions. He designed a program consisting of rows of zeros and types. During this time period, Leibiniz had not but located a use for this method.
+
Binary numbers have been initially explained in Chandashutram composed by Pingala in a hundred BC. Binary Code was initially launched through the German mathematician and philosopher Gottfried Wilhelm Leibniz throughout the 17th century. Leibniz was looking to discover a system that converts logic’s verbal statements right into a pure mathematical a person. After his tips ended up disregarded, he came across a traditional Chinese text called ‘I Ching’ or ‘Book of Changes’, which made use of a kind of binary code. The guide had confirmed his concept that everyday living may very well be simplified or minimized right down to a collection of straightforward propositions. He established a process consisting of rows of zeros and kinds. During this time period, Leibiniz had not but identified a use for this system.
  
A further mathematician and thinker because of the identify of George Boole revealed a paper in 1847 termed 'The Mathematical Evaluation of Logic' that describes an algebraic process of logic, now referred to as Boolean algebra. Boole’s process was depending on binary, a yes-no, on-off tactic that consisted the a few most fundamental operations: AND, OR, and not. This method wasn't put into use till a graduate student from Massachusetts Institute of Know-how through the title Claude Shannon recognized the Boolean algebra he figured out was very similar to an electrical circuit. Shannon wrote his thesis in 1937, which applied his findings. Shannon's thesis grew to become a starting point to the use of the binary code in practical programs these kinds of as personal computers, electric circuits, and a lot more.
+
Yet another mathematician and philosopher with the identify of George Boole revealed a paper in 1847 named 'The Mathematical Analysis of Logic' that describes an algebraic program of logic, now often called Boolean algebra. Boole’s procedure was depending on binary, a yes-no, on-off solution that consisted the a few most standard functions: AND, OR, and never. This system was not set into use right until a graduate pupil from Massachusetts Institute of Technological innovation from the name Claude Shannon seen that the Boolean algebra he learned was comparable to an electrical circuit. Shannon wrote his thesis in 1937, which applied his findings. Shannon's thesis grew to become a place to begin to the use of the binary code in useful applications this kind of as personal computers, electric circuits, plus more.
  
 
ASCII code
 
ASCII code
  
The American Standard Code Data Interchange, or ASCII, employs a seven bit binary code to stand for text inside of a computer, communications gear, and also other devices that use text. Each individual letter or symbol is assigned to some variety from 0 to 127. For example, inside the 8-bit ASCII code, a lowercase "a" is represented from the bit string 01100001.
+
The American Standard Code Data Interchange, or ASCII, takes advantage of a 7 bit binary code to characterize text inside of a computer, communications equipment, together with other units that use text. Each individual letter or symbol is assigned to some variety from 0 to 127. Such as, while in the 8-bit ASCII code, a lowercase "a" is represented through the little bit string 01100001.
 
Binary-coded Decimal
 
Binary-coded Decimal
  
Binary-coded decimal, or BCD, is actually a binary encoded illustration of integer values that takes advantage of a 4-bit nibble to encode decimal digits. Four binary bits can encode approximately 16 distinct values; but, in BCD-encoded quantities, only the first 10 values in every single nibble are legal, and encode the decimal digits zero, via nine. The remaining six values are unlawful, and may bring about either a device exception or unspecified habits, dependent to the laptop implementation of BCD arithmetic.
+
Binary-coded decimal, or BCD, is often a binary encoded representation of integer values that takes advantage of a 4-bit nibble to encode decimal digits. 4 binary bits can encode as much as 16 distinctive values; but, in BCD-encoded quantities, only the to begin with 10 values in each and every nibble are authorized, and encode the decimal digits zero, through nine. The remaining 6 values are unlawful, and will trigger either a machine exception or unspecified conduct, relying on the laptop implementation of BCD arithmetic.
  
BCD arithmetic is sometimes most well-liked to floating-point numeric formats in commercial and economic apps where by the elaborate rounding behaviors of floating-point figures is inappropriate.
+
BCD arithmetic is typically most well-liked to floating-point numeric formats in commercial and economic programs wherever the sophisticated rounding behaviors of floating-point quantities is inappropriate.
  
 
This information sponsored by [http://www.simplysell.com SimplySell], mathematical calculations of [http://www.simplysell.com/sales-process Sales Process]
 
This information sponsored by [http://www.simplysell.com SimplySell], mathematical calculations of [http://www.simplysell.com/sales-process Sales Process]

גרסה אחרונה מתאריך 01:13, 13 במרץ 2012

A binary code is a strategy for representing text or laptop or computer processor instructions because of the utilization of the binary quantity system's two-binary digits 0 and one. It is accomplished by assigning somewhat string to every particular symbol or instruction. For example, a binary string of eight binary digits (bits) can stand for any of 256 possible values and can consequently correspond into a selection of distinct symbols, letters or instructions.

In computing and telecommunication, binary codes are utilized for any of a variety of methods of encoding knowledge, this sort of as character strings, into bit strings. All those techniques may very well be fixed-width or variable-width. In a very fixed-width binary code, every letter, digit, or other character, is represented by a little string on the identical duration; that little bit string, interpreted being a binary amount, is frequently exhibited in code tables in octal, decimal or hexadecimal notation. There are many character sets and lots of character encodings for them.

A little bit string, interpreted like a binary variety, may be translated into a decimal quantity. For example, the lowercase "a" as represented through the bit string 01100001, could also be represented as being the decimal variety 97.

Binary numbers have been initially explained in Chandashutram composed by Pingala in a hundred BC. Binary Code was initially launched through the German mathematician and philosopher Gottfried Wilhelm Leibniz throughout the 17th century. Leibniz was looking to discover a system that converts logic’s verbal statements right into a pure mathematical a person. After his tips ended up disregarded, he came across a traditional Chinese text called ‘I Ching’ or ‘Book of Changes’, which made use of a kind of binary code. The guide had confirmed his concept that everyday living may very well be simplified or minimized right down to a collection of straightforward propositions. He established a process consisting of rows of zeros and kinds. During this time period, Leibiniz had not but identified a use for this system.

Yet another mathematician and philosopher with the identify of George Boole revealed a paper in 1847 named 'The Mathematical Analysis of Logic' that describes an algebraic program of logic, now often called Boolean algebra. Boole’s procedure was depending on binary, a yes-no, on-off solution that consisted the a few most standard functions: AND, OR, and never. This system was not set into use right until a graduate pupil from Massachusetts Institute of Technological innovation from the name Claude Shannon seen that the Boolean algebra he learned was comparable to an electrical circuit. Shannon wrote his thesis in 1937, which applied his findings. Shannon's thesis grew to become a place to begin to the use of the binary code in useful applications this kind of as personal computers, electric circuits, plus more.

ASCII code

The American Standard Code Data Interchange, or ASCII, takes advantage of a 7 bit binary code to characterize text inside of a computer, communications equipment, together with other units that use text. Each individual letter or symbol is assigned to some variety from 0 to 127. Such as, while in the 8-bit ASCII code, a lowercase "a" is represented through the little bit string 01100001. Binary-coded Decimal

Binary-coded decimal, or BCD, is often a binary encoded representation of integer values that takes advantage of a 4-bit nibble to encode decimal digits. 4 binary bits can encode as much as 16 distinctive values; but, in BCD-encoded quantities, only the to begin with 10 values in each and every nibble are authorized, and encode the decimal digits zero, through nine. The remaining 6 values are unlawful, and will trigger either a machine exception or unspecified conduct, relying on the laptop implementation of BCD arithmetic.

BCD arithmetic is typically most well-liked to floating-point numeric formats in commercial and economic programs wherever the sophisticated rounding behaviors of floating-point quantities is inappropriate.

This information sponsored by SimplySell, mathematical calculations of Sales Process

כלים אישיים
גרסאות שפה
מרחבי שם
פעולות
ניווט
תיבת כלים